IS:303 Plywood
Prince General Purpose Plywood IS: 303
Prince General Purpose plywood is available in a variety of hardwood material like Gurjan, Red Gum Alternate (Red Gum, Poplar).
Prince Platinum IS: 303
It’s a premium grade general purpose plywood manufactured with Gurjan wood and bonded with MUF resin. It is available in MR grade and confirms the IS: 303 standards.
Prince Gold Hardwood, MR Grade, IS: 303
Prince Gold is MR grade plywood manufactured with hardwood Red Gum core. MUF resin is used to manufacture the Prince Gold ply, which makes it tough in a high moisture-prone areas. It is an economical solution for those who want to buy better quality interior grade plywood. Since it is manufactured with MUF resin and plantation timber, it is more environment – friendly & thus suits your interiors.
Advantages of Prince Gold Ply:
- Manufactured with hardwood plantation timber
- Highly stable in severe moisture condition
- High internal strength
Prince Ultra (Alternate) MR Grade, IS: 303
Made with quality plantation hardwood timber and loaded with strength, durability, and reliability. Prince Ultra is manufactured by using MUF synthetic resin and expert supervision at various stages to ensure quality. The hydraulically peeled off fresh logs with precise thickness and smoothness, are press-dried for flatness bringing down the moisture level of veneers up to 7%. Melamine fortified Urea Formaldehyde Resin provides a moisture-resistant bond, while special chemical treatment guards it against attacks of borer, termite, and fungus.
Advantages of Prince Ultra Ply:
- Chemically treated against wood – destroying the organism
- Lab – tested as per BIS specifications
- Nature-friendly
- Super-smooth surface
- No warping
Prince Premium (Red Gum), IS: 303
MR Grade 15 ply construction in 19mm
Prince Premium is manufactured with plantation timber Red Gum, which is known for its density and strength Red Gum has similar properties like Gurjan and the product made with Red Gum core is a good replacement of Gurjan wood panels. Prince premium is manufactured with the utmost care by using MUF resin and it is completely treated with anti-termite borer chemical. Sanding with a wide belt sander makes it’s surface smooth and calibrated.
Technical Specifications IS:303
| TEST | ISI Requirement | Observed Value | |
|---|---|---|---|
| 1 | Moisture Content | 5 % - 15% | 8% |
| Dimension | Length+5mm, Width+2mm, Thickness > 6mm - +/- 5%, < 6mm - +/- 10% | Within limit | |
| 2 | Sp. Gravity | >7 | |
| 3 | Resistance to Water (3 Cycles of 8 Hr Boiling & 16 Hr Drying At 65 degree C) -Adhesion To Plies | Min. Pass Standard | Excellent |
| 4 | Resistance to Micro-Organism -Adhesion To Plies | Min. Pass Standard | Excellent |
| 5 | Static Bending Strength | ||
| a | Modulus of Elasticity | ||
| -Along the grain Avg. | Min. 5000 N / Sq. mm | 6500 N / Sq. mm | |
| -Across the grain Avg. | Min. 2500 N / Sq. mm | 3000 N / Sq. mm | |
| b | Modulus of Rupture | ||
| -Along the grain Avg. | 40 N / Sq. mm | 56 N / Sq. mm | |
| -Across the grain Avg. | 20 N / Sq. mm | 30 N/Sq. mm |