IS:2202 Flush Door
Prince Doors IS: 2202 (Double Core 100% Pine Wood)
Prince BWP flush door is a durable product and known for its excellent quality exceptional finish and unique dimensional stability. It is made of selected Pinewood frames for high nail holding capacity. Prince flush doors have lock rails on both sides of the frame. The frame and battens used in the flush doors are well treated and assembled in such a way that there is no gaps in between the battens and frames. An extra coating of PF resin ensures on the assembled flush door to get more bonding strength between core and battens.
When tested according to IS: 2202 (1) specifications all the flush doors surpassed ISI standards.
Reasons to choose Prince Door:
- Manufactured with PF Resin for higher bonding
- Free from corrugation and roughness
- The high screw holding capacity
- High shock resistance
- Boiling waterproof
- Smooth surface
- Lab-tested and ecofriendly
- Zero gaps and zero bending
The specialty of Prince Door:
- All Prince Doors are manufactured with unique strength booster Chemical
- Prince doors are manufactured with selected and high-quality hardwood timber
- Timbers used to manufacture Prince Doors are treated with anti-termite borer chemical before sawing
- Frames and battens are seasoned in advance seasoning chamber for equalizing the moisture content
- All the frames and battens are cut through the ripsaw machine and planer for equal size and thickness
- The width of battens and frames are wider as per the specification of BIS
- Extra lock rail is provided for the convenience of handle and lock fittings
- Special care is taken during the assembly of battens to avoid any gap inside the door
- High solid content waterproof PF Resin is used for high strength
- Prince’s doors are pressed with Gurjan’s face and wider core in India’s best hydraulic press
Technical Specifications IS:2202
| TEST | ISI Requirement | Observed Value | |
|---|---|---|---|
| 1 | Dimension | Length, Width - + 5 mm Thickness - + 1 mm | Within limit |
| 2 | Squareness | Deviation not more then 1 mm on a Length of 55 mm | Deviation below 1 mm |
| 3 | General Flatness | Twist, Cupping, Warping Not to Exceed 6 mm | |
| 4 | Local Planeness | Depth of Deviation at any point to be less than 0.5 mm | Within limit |
| 5 | Impact Indentation Test | Depth of Indentation not to exceed 0.2 mm | Within limit |
| 6 | Edge Loading Test | Deflection of Edge with max. to be less than 5 mm | Within limit |
| 7 | Shock Resistance Test | No visible defect after test | No visible defects |
| 8 | Buckling Test | Initial Deflection - < 50 mm Residual Deflection - < 5 mm | Within limit |
| 9 | Slamming Test | No visible damage after test | No visible damage |
| 10 | Misuse Test | No Deformation after test | No Deformation |
| 11 | Varying Humidity Test | No visible Warping, Twisting or De-lamination | No such defects observed |
| 12 | End Immersion Test | No De-lamination at the end | No De-lamination |
| 13 | Knife Test | Minimum Pass Standard | Excellent |
| 14 | Glue Adhesion Test | No De-lamination | No De-lamination |
| 15 | Screw Withdraw Test | Load to withdraw screw to be more than 1000 N | Load - > 1000 N |